Pushrods

 

TUBE PUSHROD DESIGN

  • Tube Construction
  • Welded Low-Carbon Steel Tubing, SAE J526, 1008/1010
  • Hollow tube with balls resistance welded to each end
  • Tube configuration can be either straight or with reduced ends for smaller ball fit
  • Tube can also be integrated with a washer and vary in length per requirement
  • Tubes can be heat treated for wear resistance

BALL PUSHROD DESIGN

  • Tube Construction
  • Steel AISI #1013 or #1018, Carburized Hardened and Finished.
    Case depth 1.143mm – 1.778mm, Rockwell “C” 60-68
  • Optional ball material; AISI 52100 Alloy Steel
  • Solid or drilled balls per request
  • Various diameters

 



TYPICAL TUBE SIZES

  • .188" O.D. with .049" Wall Thickness
  • .250" O.D. with .049" Wall Thickness
  • .313" O.D. with .060", .075" Wall Thickness
  • .343" O.D. with .075" Wall Thickness
  • .375" O.D. with .075" Wall Thickness
  • .437" O.D. with .075" Wall Thickness
  • Other sizes available upon request.

TYPICAL BALL SIZES

  • .1875" Solid ball
  • .250" Solid ball
  • .3125" Solid or drilled ball
  • .343" Drilled ball
  • .375" Drilled ball